Marlboro Packard – Exquisite Machinery

Most wheel makers remain a mystery. Even when they mark their wheels, leaving names or initials, it can be difficult to determine who they were or to find any details about their lives.

That is not the case with Marlboro (or Marlborough) Packard. He marked his wheels and lived in a town–Union, Maine–with an unusually well-documented history, allowing us to get a small glimpse into his life.

Marlboro was born in 1763 in Bridgewater, Massachusetts. According to DAR records, he served as a private in the Massachusetts militia during the Revolutionary War. At some point after that, he moved to Maine, joining his uncles, Micah and Benjamin, who had been there as early as the 1770s.

His uncle, Benjamin, in fact, has a role in Union’s early history. Initially called Stirlingtown, Union was born in controversy. A group of Scottish men first claimed possession but, soon after, a Massachusetts man, Dr. John Taylor, bought the land, despite the previous claims. After some dispute, Taylor prevailed, and in 1775, Marlboro’s uncle, Benjamin, worked with Taylor’s indentured servants to clear the land and cut lumber for Taylor. History of Union, Maine, pp. 27-39.

That year, Benjamin Packard built the first permanent house, a log cabin, in what would become Union. The next spring, in 1776, the Robbins family moved into the cabin and their story was the basis for the novel “Come Spring.” The foundation of the house built by Benjamin is still intact near the shore of Union’s Seven Tree Pond.

It’s unclear whether Marlboro came to Maine right after serving in the militia, but the 1790 census shows that, by then, he had joined his uncles, living in Cushing on the coast. That same year, he married Mary Ann “Nancy” Blackington. They had seven children, all of whom lived to adulthood–no small feat in those days. According to his children’s birth records, Marlboro appears to have been living in Union in the early 1790s, then moved to nearby Warren and Thomaston, and eventually returned to Union by 1803.

He lived the rest of his life in Union, on a farm on Clarry Hill, at times serving the town in positions such as selectman. He died in 1846, days shy of his 83rd birthday. Marlboro’s descendants still live in and around Union. His oldest son, Nathan, named his first son (born in 1828) “Marlboro.” This namesake grandson became a well-known master shipbuilder in Searsport, Maine, clearly inheriting his grandfather’s design and woodworking skills. https://en.wikipedia.org/wiki/Marlboro_Packard.

As noted in the previous post about Marlboro’s flax wheels, “Clarry,” his wheels are well-designed and attractive. And, as with his flax wheels, Marlboro’s great wheels are immediately recognizable as his.

He used a double-nut tensioning system–a somewhat unusual design found primarily in wheels from New England and New York. The wheels are sturdy, with some lovely turnings and scribe marks, and his signature “MP” stamps.

The hub is particularly nice, with brass bearings in both ends.

The axle has square base, holding the wheel away from the upright, and nuts to tighten down each end.

My wheel originally came with a Miner’s head, but I replaced it with an old bat head, new spindle, and new cornhusk spindle bearings.

As with his flax wheels, Marlboro’s great wheels show no influence from the Shakers. For example, the top of the spindle support is hefty–flat, wide, and collar-less–in contrast with Shaker wheels, which generally have slender, curving uprights with a collar.

Interestingly, a few wheels have turned up that look almost identical to Packard’s, but with the initials “MS.” It is not known whether MS may have worked with Marlboro, copied him (or the other way around), or whether the similarity is coincidental.

Thanks to some friends who spotted her, I found my great wheel in the front window of an antique store in Liberty, Maine, two towns away from Union, where it had been sitting for a long time.

According to the store owner, it had belonged to a Liberty woman, Ida Quigg McLain, who lived in a old square farmhouse with a huge central chimney.

Whether that chimney is responsible, I’ll never know, but the spinner side of the wheel is badly blackened and charred,

likely from being too close to an open fire or hot stove.

The charring doesn’t affect the wheel’s spinning, though. She spins beautifully and I love that she’s a local girl—made from trees one ridge over from where I now live, by a man with one of my all-time favorite names—Marlboro Packard.

For more on Marlboro Packard and the history of Union, see the previous post “Clarry,” and these books:

Sibley, John Langdon, History of Union, Maine, originally published in 1851, reprinted by New England History Press, Somersworth, N.H, 1987.

Williams, Ben Ames, Come Spring, Houghton, Mifflin Co., Boston, 1940.

Update December 2020: Last month I picked up a Packard great wheel in Nobleboro, a nearby town, for my friend, Susanne. The seller had found the wheel at the Waldoboro dump. Its drive wheel did not appear to be original, but the rest of the wheel was lovely and had some interesting differences with my wheel. My wheel is on the left in the photo below.

Susanne’s wheel had a slightly daintier feel than mine. The tension screw supports were smaller overall and fit up snugly against the table–in contrast to mine and another wheel of Susanne’s, which have a significant gap between the supports and the table.

Susanne’s on the left, mine on the right.

In addition, the ball at the top of the wheel post is flatter on Susanne’s than on mine.

The legs are much the same.

Intriguingly, Susanne’s wheel had a “VII” inscribed on the table, the front tension screw support and the wheel post–something I have not seen on other Packard wheels.

It is hard to say whether the numbers were for disassembling the wheel for transport, used because apprentices or others were helping with assembly, or for some other reason.

The VII is very faint in the photo–easier to see in person.

It would be interesting to know whether Marlboro Packard changed his wheels slightly over the decades of production or whether he changed things up from wheel to wheel. It was a treat to be able to compare these wheels side by side.

Marlboro Packard, born in Massachusetts in 1763 into a family of carpenters, moved north to Union, Maine where he produced attractive, well-engineered spinning wheels, found throughout the midcoast to this day.

Marlboro, also spelled “Marlborough,” was “a natural mathematician. He excelled in the solution of mathematical problems and in the use of mechanical tools. He could make anything from a boot-jack to a wagon wheel, from a window to a spinning wheel and in construction of the latter, he was a past master. All spinning wheels in the locality having the letters ‘MP’ carved on the end of the body are the work of Mr. Packard.” Soldiers and Sailors of Lower St. Georges Maine, p. 51.

Marlboro was born in Bridgewater, Massachusetts, in the same part of town (now Brockton) as the wheel-making Thompson family (see previous posts “Polly and a Skarne” and “Mag Reiver and a Finger”).

Multiple generations of Thompsons (also spelled “Thomson”) were well-known wheel-makers in Bridgewater.

While the Packards were carpenters, I couldn’t find evidence that they made wheels while in Bridgewater or that they worked with the Thompsons.

But it does appear that the two families were related. Marlboro’s aunt, Joanna Packard (his father Nathan’s sister), had a daughter, Jennett Allen, who married wheel-maker John Thompson. John and Jennett were wheel-maker Hannibal Thomson’s parents.

That makes Marlboro and Hannibal first cousins once-removed.

Both Marlboro and Hannibal ended up in Maine making spinning wheels, but they are a generation apart and their wheels reflect that.

Marlboro’s wheels were similar to those made by the earlier Thomson generations, based on a traditional Scottish-style wheel, while Hannibal’s wheels show the strong influence of the Maine Shakers on wheel styles in the early and mid 1800s.

Marlboro’s father, Nathan, died in 1772, when Marlboro was only nine years old. It’s unclear when Marlboro came to Maine, but his uncles Micah and Benjamin apparently moved to Cushing on the midcoast in the 1760s.

They worked as carpenters and appear to have done well. I couldn’t determine how long Marlboro stayed on in Bridgewater or whether he learned wheel-making skills there before coming to Maine.

But eventually, Marlboro joined his uncles and by 1795 must have been well established in his trade, because the Maine Historical Society has copies of payment invoices to Marlboro for turning work, including banisters, for Montpelier, the mansion being built in Cushing by Henry Knox, George Washington’s former Secretary of War.

In the 1790s or early 1800s Marlboro moved to Union, about 15 miles inland up the St. George River from the coast, and settled on Clarry Hill, the top of which is now blueberry barrens with a magnificent view.

The Packard farmhouse still stands and Marlboro’s wheels appear with regularity in antique stores and barn sales throughout the area.

In the Maine State Museum, one of Marlboro’s wheels serves as the example of a typical Maine flax wheel.

Marlboro’s flax wheels are easily recognizable.

Aside from his doubled initial stamps on the table end, the turnings are somewhat unusual in their generous proportions. There is nothing skinny or delicate about these wheels, they are plump and ripe-looking.

My wheel has a replacement treadle.

Marlboro’s treadles have a distinct notch such as this one found by a friend in Searsport. Here is her wheel and the treadle.

On my Packard wheel, the back side of the drive wheel has black marks, which look somewhat like burn marks, but in odd patterns.

It also has gouge marks on the table, which remain something of a mystery.

They are usually attributed to the practice of sticking knives (or forks) in the table to separate or guide the double drive band, perhaps when plying.

My wheel has a quirk shared with another of my Maine wheels, in that if the whorl is tightened fully, it tends to pinch the bobbin so that it doesn’t turn freely, so I need to back it off slightly. Once that is done, she spins fast and sweet.

I was delighted to be contacted this week by a woman seeking information about her beautiful Packard wheel bought in New York state. It is complete with a full distaff and in amazing condition. It is satisfying to see that Marlboro’s wheels have been cherished and maintained so that they can continue to spin for us two hundred years later.

The wonderful quote on Marlboro is from:

Miller, Frank Burton, Soldiers & Sailors of the Plantation of Lower St. Georges Maine, Who Served in the War for American Independence, Genealogical Publishing Co., 1999.

Update December 2020:

I recently ran across this old photograph for sale in eBay. According to the seller, it was taken in 1914 and is from a photo album belonging to the Fountain and Sproul family from Round Pond and Sproul Hill in Bristol, Maine. The back of the photo identifies the woman knitting as Margy Johnson. What caught my eye was the swift behind Margy Johnson and, of course, the spinning wheel, which is a Marlboro Packard wheel. Bristol is about thirty miles from Union, where the wheel was made. It is hard to tell from the photo whether the wheel was still in use. The treadle appears quite worn, the footman is attached and there appears to be a drive band. It felt like I met an old friend when I recognized this wheel.